When using the electromagnetic pulse valve,you should first pay attention to the following points

When using the electromagnetic pulse valve,you should first pay attention to the following points:

1.The power supply conditions of the electromagnetic pulse valve.When selecting the electromagnetic pulse valve,you should first pay attention to the voltage of the electromagnetic valve to avoid burning the coil.

2.The rated current and power consumption should be selected according to the power supply capacity.It should be noted that the VA value is higher when AC starts.When the capacity is insufficient,the indirect pilot type electromagnetic valve should be used first.

3.According to the type of power supply,select AC and DC solenoid valves respectively.Generally speaking,AC power is easy to use.

4.When used in corrosive or explosive environments,corrosion-resistant ones should be selected according to safety requirements.

5.If the environmental space is limited,please choose a multi-functional solenoid valve because it saves the bypass and three manual valves and is easy to repair online.

6.In the environment with high relative humidity and water droplets and rain,waterproof electromagnetic pulse valves should be selected.

7.The highest and lowest temperatures of the environment should be selected within the allowable range.If there is a deviation,special requirements should be made.When the capacity is insufficient,the indirect-guided electromagnetic pulse valve should be used first.

8.For voltage specifications,AC220V and DC24V should be used as much as possible.

9.For power supply voltage fluctuation,AC usually uses+%10%.-15%,and DC allows±%10.If it exceeds the tolerance,voltage stabilization measures must be taken or special ordering requirements must be made.

10.Special varieties should be selected in environments with frequent vibrations,bumps and impacts,such as marine electromagnetic pulse valves.