Bean Sprout Hammer

The bean sprout hammer is a system that makes the plates vibrate to remove dust deposited on their surfaces.The shaft buckle of the bean sprout hammer is composed of two parts:a U-shaped card and a shaft clamp connected to the shaft,and then the two parts are welded together.It should be noted that the welded shaft buckle should protect the required relative position so that the assembled rapping hammer can hit the required position correctly.Generally,one rapping hammer is installed for a row of plates.The rapping hammers of each row in the same electric field are installed on a transmission shaft and staggered at an angle in turn so that each row of plates is vibrated alternately.The rapping intensity and rapping frequency can be adjusted with appropriate electronic control devices.

The bean sprout hammer designs the hammer arm into a curved shape.As the rapping shaft rotates,the curved hammer arm rotates closely with the shaft.The distance between the hammer head and the rapping shaft is always kept in a small range,which can prevent the hammer head from entering the discharge distance of the electric field and causing the cathode line and the hammer head to discharge.At the same time,the torque that makes the hammer head rise is greatly reduced,so a lower-power rapping motor can be used to achieve a better rapping effect.