Air box pulse dust collector

The PPC air box pulse dust collector is divided into several box areas, each box has 32, 64, 96, 128 bags, and there is a cylinder-driven lifting valve on the side outlet pipe of each box. When the dust collector filters the dust-containing gas for a certain time, the dust cleaning controller sends a signal, and the lifting valve of a box chamber begins to close and cut off the filtering airflow, and then the pulse valve of the box chamber opens to clean the dust, and the cleaning is completed. The lifting valve is reopened to make this box chamber filter again, and all the cleaning work is completed one by one according to the above procedures.

The air box pulse dust collector integrates the characteristics of the dust collector such as chamber backblowing and pulse jet blowing, which enhances the applicability of use. It can be used for crushers, dryers, coal mills, raw material mills, cement mills, packaging machines and various warehouse top dust removal equipment, and can also be used as dust removal in other industries.

The main structure of the air box pulse bag dust collector consists of four parts: box body, bag chamber, ash hopper, air inlet and outlet, and is equipped with pillars, ladder guardrail compressed air pipeline system and dust cleaning control mechanism.

The main design feature of the air box pulse dust collector is that there is no venturi tube or spray pipe on the upper mouth of the frame, but the pulse valve directly sprays compressed air into the clean air chamber to clean the filter bag. This not only reduces the resistance of the spraying work, but also facilitates inspection and bag replacement in each chamber.