Cathode rapping hammer

The cathode rapping hammer is connected to the cathode frame of the electrostatic precipitator with a hammer head seat, a hammer head corresponding to the anvil on the cathode frame, and a connecting rod on the hammer head; a vibrating shaft is provided on the cathode frame, a shift fork is connected to the vibrating shaft, and a shift fork is provided on the shift fork, and the shift rod can shift the connecting rod on the hammer head.

Structural principle of cathode hammer:

The cathode rapping hammer includes a flexure clamping arm, a hammer head, a hammer handle and a vibrating shaft, characterized in that the flexure clamping arm is divided into an arm, an arc-shaped flexure arm and an arm, the arm of the flexure clamping arm and the hammer head are connected by a large rivet, the arm of the flexure clamping arm and the hammer handle are movably connected by a small rivet, and the hammer handle is fixed to the vibrating shaft.

The shaft buckle of the cathode hammer is composed of two parts: a U-shaped card and a shaft clamp connected to the shaft, and then the two parts are welded together. However, due to the influence of various conditions on the welding quality, the welded shaft buckle cannot protect the required relative position, so that the assembled rapping hammer cannot hit the required position correctly, and the shaft buckle and the pin shaft are prone to breakage due to the welding structure, which affects the normal use of the electrostatic precipitator.

The anode rapping hammer is a system that vibrates the plates and electrodes to remove the dust deposited on their surfaces. The shaft buckle of the anode rapping hammer is composed of two parts: a U-shaped card and a shaft clamp connected to the shaft, and then the two parts are welded together. It should be noted that the welded shaft buckle should protect the required relative position, so that the assembled rapping hammer can hit the required position correctly. Generally, one row of plates is equipped with a rapping hammer, and the rapping hammers of each row of the same electric field are installed on a transmission shaft, and are staggered at an angle in turn, so that each row of plates is alternately rapped. The rapping intensity and rapping frequency can be adjusted by appropriate electronic control devices. Working principle of anode hammer: Anode hammer is a system that makes the plates and electrodes vibrate to remove dust deposited on their surfaces. The shaft buckle of anode rapping hammer is composed of two parts: a U-shaped card and a shaft card connected to the shaft, and then the two parts are welded together. It should be noted that the welded shaft buckle must protect the required relative position so that the assembled rapping hammer can hit the required position correctly. Generally, one rapping hammer is installed for a row of plates, and the rapping hammers of each row in the same electric field are installed on a transmission shaft and staggered at an angle in turn, so that each row of plates is alternately rapped. The rapping intensity and rapping frequency can be adjusted by appropriate electronic control devices.