NE bucket elevator

NE bucket elevator uses centrifugal and mixed methods to discharge materials.It is suitable for conveying powdery,granular,small pieces of non-abrasive materials with a bulk density of less than 1.5t/m3,such as grains,coal,sand,cement,fertilizers,etc.The material temperature generally does not exceed 60 degrees.

Main features of NE bucket elevator:

1.Wide lifting range.This type of elevator has few requirements on the type and characteristics of materials.It can not only lift general powdery and small granular materials,but also lift materials with greater abrasiveness,good sealing,and less environmental pollution.

2.Low driving power,using inflow feeding,induction unloading,and large-capacity hopper intensive layout.There is almost no return and digging when the material is lifted,so the ineffective power is small.

3.Long service life.The feeding of the elevator adopts inflow,and there is no need to use a bucket to dig materials.There is rarely squeezing and collision between materials.The machine is designed to protect the material from being scattered during feeding and unloading,reducing mechanical wear.

4.Good operation performance,advanced design principles and processing methods protect the excellent operation of the whole machine,and the trouble-free time exceeds 20,000 hours.The lifting height is high and the elevator runs smoothly,so it can reach a higher lifting height.Bucket elevator model selection:As a commonly used lifting equipment,the selection of bucket elevators is restricted by many factors.Choosing the wrong model will bring endless troubles to the user.