JMK series non-contact pulse controller

The JMK series non-contact pulse controller is an automatic control instrument for the high and low pressure spray cleaning system of the pulse bag dust collector.The switch signal it outputs directly controls the opening and closing of the solenoid valve,so that the compressed air can circulate and spray the filter bag,thereby achieving the purpose of cleaning.

The JMK series non-contact pulse controller uses digital integrated circuits and circuit design,so it has the characteristics of stable performance,strong anti-interference,low power consumption,easy use and maintenance.The JMK series non-contact pulse controller can be widely used in dust collector control in industrial sectors such as metallurgy,cement,mining,casting,and medicine.Our factory can also design it according to the requirements of users from all walks of life.

JMK series contactless pulse controller uses industrial-grade chip as the control core.The pulse controller has obvious setting marks on the printed circuit board,which can be easily set up.The output side of the controller is equipped with working indications of each output point,which can judge the status of the output point.The controller is equipped with manual operation buttons,which can be easily debugged and operated.The pulse controller adopts a shell structure and can be used outdoors and in dusty environments with connectors.The pulse controller is equipped with pluggable printed circuit board terminals for easy wiring.

JMK series contactless pulse controller use environment:

1.Temperature-20℃～50℃;

2.Relative air humidity≤85%;

3.No severe corrosive gas and conductive dust;

4.No severe vibration or impact.