LFEF series vertical kiln glass fiber bag dust collector

LFEF series dryer glass fiber bag dust collector is a new product developed by Hefei Cement Design Institute of Building Materials Bureau forφ1.5×12M,φ1.5×15M,φ2.2×12M,φ2.4×16M and other specifications of dryer flue gas dust removal.This product adopts the vertical kiln straight fiber bag dust removal that won the ministerial-level technical progress award in 1989,microcomputer-controlled chamber backwashing,timing,fixed resistance cleaning,temperature detection and display,etc.,so that the glass fiber bag dust collector can operate stably in the dryer flue gas dust removal,and the chimney outlet emission concentration is lower than the prescribed 150mg/m3n emission standard(actually≤150mg/m3n).LFEF series dryer glass fiber bag dust collector can be operated without stopping.The equipment can change bags in different chambers without stopping.It is simple to operate and has low operating costs.It is currently the ideal equipment for domestic dryer flue gas dust removal.Changing bags in different chambers is simple to operate and has low operating costs.It is currently the ideal equipment for domestic dryer flue gas dust removal.

Maintenance and precautions of LFEF series dryer glass fiber bag dust collector:

①The cylinder,conveyor,and induced draft fan should be regularly inspected and refueled 1-2 times a week.The pneumatic triplex,air compressor,and air bag should be frequently refueled and drained once per shift.

②During the normal operation of the dust collector,the operator should monitor the inlet and outlet temperature of the dust collector and the main fan current,and make records,generally once every half an hour.

③The management of the dust collector during shutdown,startup,and shutdown should be strictly implemented in accordance with the relevant provisions of this regulation.

④The cylinder,solenoid valve,electrical components,motor,and control cabinet should be cleaned.

⑤When operating manually,remember to unload the dust first and then clean the dust.

⑥Regularly check the sealing of the cylinder,solenoid valve,flange surface,and inspection door.If leakage or aging of the sealing strip is found,it should be replaced in time.

⑦Regularly check the gas system and ash removal work.If abnormalities are found,the causes should be identified and eliminated in time.