ZC Mechanical Rotary Back-Blowing Flat Bag Dust Collector

ZC Mechanical Rotary Back-Blowing Flat Bag Dust Collector is a new type of bag dust collector. The operation practice has proved that the dust collector has the advantages of low resistance, simple maintenance and operation. It is suitable for process recovery and dust removal and purification of fine dust, and the emission concentration can be far lower than the regulations.

ZC type mechanical rotary back-blowing flat bag dust collector adopts a circular body structure with uniform force, strong explosion resistance and compact structure. It adopts high-pressure fan back-blowing to clean the dust, which is not restricted by air source conditions. It uses resistance to automatically control back-blowing to clean the dust, saving energy and extending the service life of the bag.

In the process of using the ZC type mechanical rotary back-blowing flat bag dust collector, regular inspection and maintenance should be carried out, which can extend the service life of the dust collector. The main inspection part is the operation of the vibration device and the ash discharge transmission mechanism. In addition, in the entire inspection process of the rotary back-blowing dust collector, if the zipper machine and the star-shaped discharger are stopped in an emergency, they should be started several times before starting again. After removing the accumulated material in the ash hopper, they can start again.

ZC mechanical rotary back-blowing flat bag dust collector can be installed indoors in extremely cold areas and outdoors in other areas. It can be widely used in many departments such as machinery, casting, mining, smelting, building materials, grain and chemical industry, etc.